With the nylon webbing edging sewn into place around the edge you will have something that looks a fair bit like this. Please note we did not close the loop so we can install the wire ring.
After gently guiding the wire into place you should have a bit of overlap. This is so we can adjust the taughtness of the wire and have space to secure the ends together in the next step
Using some small bits of wire (I used some stapes from a heavy staple gun) tightly wrap the ends to secure them together. Using a couple pair of pliers at the same time is recommended for a tight band.
Finally wrap the wire ends and banding with a couple layers of electrical tape to prevent any chafing to the webbing.
