Our next step for our lockpick here is to melt a small hole in the bottom of the outer shell as well as the bottom the internal battery holder. You may need to bend the battery contact out of the way to make room for the wires.

With the wire inserted in the hole in the bottom of the lockpick, connect the wires to the terminals for the battery. It doesn't matter what wire goes to what terminal on this if you dont reinstall the tripple A battery.

Lace the wire through the hole in the bottom of the lockpicks outer shell. If you have left enough extra wire, it would really make life easy for this.

Next up cut the tip off of one of the lock picks you have acquired or made, the hole in the front of the flossier is 3/16th wide, just about perfect to fit the pick into. Use some superglue to affix it to the flossier

Make sure the lockpick is firmly mounted in the end of the flossier and apply a drop of superglue to the bottom of the flossier to make sure the wires won't rip out.