 |
|
| |
|
|
| The first step after you have all the parts you
will need is to start the disassembly of your monitor.
Remove the stand completely from the monitor and
I recommend outright removing it from your work
bench. These are often very heavy and are at least
half of the weight of the monitor. If it was knocked
over onto your work it could damage your project
or the unsuspecting foot it was dropped onto. |
|
|
| With the back panel removed
you can gain access to the bulb at the bottom
of the monitor. Often in these monitors is some
sheet metal that acts as shielding for the monitor.
Remove the shielding carefully and you will have
access to the inverter as well. if you have access
to a grounding strap I recommend using it from
this point out to reduce risks of damaging any
of the circuit boards.
|
|
|
|
|
